Gecko [ www.jdcpatala.org ]

Name	Size	Permission
atomic	[ DIR ]	drwxr-xr-x
basic	[ DIR ]	drwxr-xr-x
coccinelle	[ DIR ]	drwxr-xr-x
dtc	[ DIR ]	drwxr-xr-x
gcc-plugins	[ DIR ]	drwxr-xr-x
gdb	[ DIR ]	drwxr-xr-x
genksyms	[ DIR ]	drwxr-xr-x
kconfig	[ DIR ]	drwxr-xr-x
ksymoops	[ DIR ]	drwxr-xr-x
mod	[ DIR ]	drwxr-xr-x
package	[ DIR ]	drwxr-xr-x
selinux	[ DIR ]	drwxr-xr-x
tracing	[ DIR ]	drwxr-xr-x
.asn1_compiler.cmd	4.67 KB	-rw-r--r--
.bin2c.cmd	1.64 KB	-rw-r--r--
.conmakehash.cmd	3.62 KB	-rw-r--r--
.extract-cert.cmd	6.61 KB	-rw-r--r--
.insert-sys-cert.cmd	6.52 KB	-rw-r--r--
.kallsyms.cmd	3.88 KB	-rw-r--r--
.recordmcount.cmd	4.86 KB	-rw-r--r--
.sign-file.cmd	8.02 KB	-rw-r--r--
.sortextable.cmd	5.17 KB	-rw-r--r--
Kbuild.include	12.11 KB	-rw-r--r--
Kconfig.include	1.64 KB	-rw-r--r--
Lindent	502 B	-rwxr-xr-x
Makefile	1.45 KB	-rw-r--r--
Makefile.asm-generic	1.8 KB	-rw-r--r--
Makefile.build	17.82 KB	-rw-r--r--
Makefile.clean	2.15 KB	-rw-r--r--
Makefile.dtbinst	1.09 KB	-rw-r--r--
Makefile.extrawarn	2.68 KB	-rw-r--r--
Makefile.gcc-plugins	2.45 KB	-rw-r--r--
Makefile.headersinst	2.87 KB	-rw-r--r--
Makefile.host	6.86 KB	-rw-r--r--
Makefile.kasan	1.44 KB	-rw-r--r--
Makefile.kcov	359 B	-rw-r--r--
Makefile.lib	14.65 KB	-rw-r--r--
Makefile.modbuiltin	1.67 KB	-rw-r--r--
Makefile.modfinal	1.79 KB	-rw-r--r--
Makefile.modinst	1.31 KB	-rw-r--r--
Makefile.modpost	3.42 KB	-rw-r--r--
Makefile.modsign	791 B	-rw-r--r--
Makefile.package	6.49 KB	-rw-r--r--
Makefile.ubsan	864 B	-rw-r--r--
adjust_autoksyms.sh	2.62 KB	-rwxr-xr-x
asn1_compiler	35.1 KB	-rwxr-xr-x
asn1_compiler.c	35.32 KB	-rw-r--r--
bin2c	16.43 KB	-rwxr-xr-x
bin2c.c	743 B	-rw-r--r--
bloat-o-meter	3.28 KB	-rwxr-xr-x
bootgraph.pl	5.64 KB	-rwxr-xr-x
bpf_helpers_doc.py	15.5 KB	-rwxr-xr-x
cc-can-link.sh	166 B	-rwxr-xr-x
check_extable.sh	4.93 KB	-rwxr-xr-x
checkincludes.pl	1.94 KB	-rwxr-xr-x
checkkconfigsymbols.py	15.5 KB	-rwxr-xr-x
checkpatch.pl	199.44 KB	-rwxr-xr-x
checkstack.pl	5.27 KB	-rwxr-xr-x
checksyscalls.sh	7.27 KB	-rwxr-xr-x
checkversion.pl	1.9 KB	-rwxr-xr-x
clang-version.sh	527 B	-rwxr-xr-x
cleanfile	3.46 KB	-rwxr-xr-x
cleanpatch	5.06 KB	-rwxr-xr-x
coccicheck	7.25 KB	-rwxr-xr-x
config	4.63 KB	-rwxr-xr-x
conmakehash	17.01 KB	-rwxr-xr-x
conmakehash.c	5.85 KB	-rw-r--r--
const_structs.checkpatch	964 B	-rw-r--r--
decode_stacktrace.sh	3.89 KB	-rwxr-xr-x
decodecode	2.57 KB	-rwxr-xr-x
depmod.sh	1.33 KB	-rwxr-xr-x
diffconfig	3.72 KB	-rwxr-xr-x
documentation-file-ref-check	5.43 KB	-rwxr-xr-x
export_report.pl	4.5 KB	-rwxr-xr-x
extract-cert	17.88 KB	-rwxr-xr-x
extract-cert.c	3.46 KB	-rw-r--r--
extract-ikconfig	1.69 KB	-rwxr-xr-x
extract-module-sig.pl	3.66 KB	-rwxr-xr-x
extract-sys-certs.pl	3.75 KB	-rwxr-xr-x
extract-vmlinux	1.66 KB	-rwxr-xr-x
extract_xc3028.pl	44.62 KB	-rwxr-xr-x
faddr2line	6.15 KB	-rwxr-xr-x
file-size.sh	86 B	-rwxr-xr-x
find-unused-docs.sh	1.27 KB	-rwxr-xr-x
gcc-goto.sh	511 B	-rwxr-xr-x
gcc-ld	711 B	-rwxr-xr-x
gcc-plugin.sh	1.06 KB	-rwxr-xr-x
gcc-version.sh	588 B	-rwxr-xr-x
gcc-x86_32-has-stack-protector...	173 B	-rwxr-xr-x
gcc-x86_64-has-stack-protector...	198 B	-rwxr-xr-x
gen_compile_commands.py	5.56 KB	-rwxr-xr-x
gen_ksymdeps.sh	399 B	-rwxr-xr-x
get_abi.pl	10.09 KB	-rwxr-xr-x
get_dvb_firmware	24.54 KB	-rwxr-xr-x
get_maintainer.pl	66.04 KB	-rwxr-xr-x
gfp-translate	1.69 KB	-rwxr-xr-x
headerdep.pl	3.5 KB	-rwxr-xr-x
headers_check.pl	3.73 KB	-rwxr-xr-x
headers_install.sh	3.56 KB	-rwxr-xr-x
insert-sys-cert	22.2 KB	-rwxr-xr-x
insert-sys-cert.c	13.08 KB	-rw-r--r--
kallsyms	22.3 KB	-rwxr-xr-x
kallsyms.c	18.02 KB	-rw-r--r--
kernel-doc	60.77 KB	-rwxr-xr-x
kmsg-doc	12.13 KB	-rwxr-xr-x
ld-version.sh	269 B	-rwxr-xr-x
leaking_addresses.pl	12.8 KB	-rwxr-xr-x
link-vmlinux.sh	7.95 KB	-rwxr-xr-x
makelst	808 B	-rwxr-xr-x
markup_oops.pl	7.92 KB	-rwxr-xr-x
mkcompile_h	2.57 KB	-rwxr-xr-x
mkmakefile	426 B	-rwxr-xr-x
mksysmap	1.33 KB	-rwxr-xr-x
mkuboot.sh	414 B	-rwxr-xr-x
module-common.lds	901 B	-rw-r--r--
modules-check.sh	303 B	-rwxr-xr-x
namespace.pl	13.18 KB	-rwxr-xr-x
nsdeps	1.94 KB	-rw-r--r--
objdiff	2.84 KB	-rwxr-xr-x
parse-maintainers.pl	3.72 KB	-rwxr-xr-x
patch-kernel	9.95 KB	-rwxr-xr-x
pnmtologo.c	11.91 KB	-rw-r--r--
profile2linkerlist.pl	414 B	-rwxr-xr-x
prune-kernel	708 B	-rwxr-xr-x
recordmcount	32.13 KB	-rwxr-xr-x
recordmcount.c	16.51 KB	-rw-r--r--
recordmcount.h	17.14 KB	-rw-r--r--
recordmcount.pl	18.8 KB	-rwxr-xr-x
setlocalversion	4.29 KB	-rwxr-xr-x
show_delta	3.01 KB	-rwxr-xr-x
sign-file	26.52 KB	-rwxr-xr-x
sign-file.c	9.76 KB	-rw-r--r--
sortextable	21.8 KB	-rwxr-xr-x
sortextable.c	8.32 KB	-rw-r--r--
sortextable.h	5.45 KB	-rw-r--r--
spdxcheck-test.sh	323 B	-rw-r--r--
spdxcheck.py	9.92 KB	-rwxr-xr-x
spelling.txt	28.76 KB	-rw-r--r--
sphinx-pre-install	17.59 KB	-rwxr-xr-x
split-man.pl	600 B	-rwxr-xr-x
stackdelta	1.84 KB	-rwxr-xr-x
stackusage	794 B	-rwxr-xr-x
subarch.include	641 B	-rw-r--r--
tags.sh	9.26 KB	-rwxr-xr-x
tools-support-relr.sh	518 B	-rwxr-xr-x
ubuntu-retpoline-extract-one	7.26 KB	-rw-r--r--
unifdef.c	34.8 KB	-rw-r--r--
ver_linux	2.69 KB	-rwxr-xr-x
xen-hypercalls.sh	386 B	-rw-r--r--
xz_wrap.sh	562 B	-rwxr-xr-x

Code Editor : faddr2line

#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
#
# Translate stack dump function offsets.
#
# addr2line doesn't work with KASLR addresses.  This works similarly to
# addr2line, but instead takes the 'func+0x123' format as input:
#
#   $ ./scripts/faddr2line ~/k/vmlinux meminfo_proc_show+0x5/0x568
#   meminfo_proc_show+0x5/0x568:
#   meminfo_proc_show at fs/proc/meminfo.c:27
#
# If the address is part of an inlined function, the full inline call chain is
# printed:
#
#   $ ./scripts/faddr2line ~/k/vmlinux native_write_msr+0x6/0x27
#   native_write_msr+0x6/0x27:
#   arch_static_branch at arch/x86/include/asm/msr.h:121
#    (inlined by) static_key_false at include/linux/jump_label.h:125
#    (inlined by) native_write_msr at arch/x86/include/asm/msr.h:125
#
# The function size after the '/' in the input is optional, but recommended.
# It's used to help disambiguate any duplicate symbol names, which can occur
# rarely.  If the size is omitted for a duplicate symbol then it's possible for
# multiple code sites to be printed:
#
#   $ ./scripts/faddr2line ~/k/vmlinux raw_ioctl+0x5
#   raw_ioctl+0x5/0x20:
#   raw_ioctl at drivers/char/raw.c:122
#
#   raw_ioctl+0x5/0xb1:
#   raw_ioctl at net/ipv4/raw.c:876
#
# Multiple addresses can be specified on a single command line:
#
#   $ ./scripts/faddr2line ~/k/vmlinux type_show+0x10/45 free_reserved_area+0x90
#   type_show+0x10/0x2d:
#   type_show at drivers/video/backlight/backlight.c:213
#
#   free_reserved_area+0x90/0x123:
#   free_reserved_area at mm/page_alloc.c:6429 (discriminator 2)

set -o errexit
set -o nounset

READELF="${CROSS_COMPILE:-}readelf"
ADDR2LINE="${CROSS_COMPILE:-}addr2line"
SIZE="${CROSS_COMPILE:-}size"
NM="${CROSS_COMPILE:-}nm"

command -v awk >/dev/null 2>&1 || die "awk isn't installed"
command -v ${READELF} >/dev/null 2>&1 || die "readelf isn't installed"
command -v ${ADDR2LINE} >/dev/null 2>&1 || die "addr2line isn't installed"
command -v ${SIZE} >/dev/null 2>&1 || die "size isn't installed"
command -v ${NM} >/dev/null 2>&1 || die "nm isn't installed"

usage() {
	echo "usage: faddr2line [--list] <object file> <func+offset> <func+offset>..." >&2
	exit 1
}

warn() {
	echo "$1" >&2
}

die() {
	echo "ERROR: $1" >&2
	exit 1
}

# Try to figure out the source directory prefix so we can remove it from the
# addr2line output.  HACK ALERT: This assumes that start_kernel() is in
# init/main.c!  This only works for vmlinux.  Otherwise it falls back to
# printing the absolute path.
find_dir_prefix() {
	local objfile=$1

local start_kernel_addr=$(${READELF} -sW $objfile | awk '$8 == "start_kernel" {printf "0x%s", $2}')
	[[ -z $start_kernel_addr ]] && return

local file_line=$(${ADDR2LINE} -e $objfile $start_kernel_addr)
	[[ -z $file_line ]] && return

local prefix=${file_line%init/main.c:*}
	if [[ -z $prefix ]] || [[ $prefix = $file_line ]]; then
		return
	fi

DIR_PREFIX=$prefix
	return 0
}

__faddr2line() {
	local objfile=$1
	local func_addr=$2
	local dir_prefix=$3
	local print_warnings=$4

local func=${func_addr%+*}
	local offset=${func_addr#*+}
	offset=${offset%/*}
	local size=
	[[ $func_addr =~ "/" ]] && size=${func_addr#*/}

if [[ -z $func ]] || [[ -z $offset ]] || [[ $func = $func_addr ]]; then
		warn "bad func+offset $func_addr"
		DONE=1
		return
	fi

# Go through each of the object's symbols which match the func name.
	# In rare cases there might be duplicates.
	file_end=$(${SIZE} -Ax $objfile | awk '$1 == ".text" {print $2}')
	while read symbol; do
		local fields=($symbol)
		local sym_base=0x${fields[0]}
		local sym_type=${fields[1]}
		local sym_end=${fields[3]}

# calculate the size
		local sym_size=$(($sym_end - $sym_base))
		if [[ -z $sym_size ]] || [[ $sym_size -le 0 ]]; then
			warn "bad symbol size: base: $sym_base end: $sym_end"
			DONE=1
			return
		fi
		sym_size=0x$(printf %x $sym_size)

# calculate the address
		local addr=$(($sym_base + $offset))
		if [[ -z $addr ]] || [[ $addr = 0 ]]; then
			warn "bad address: $sym_base + $offset"
			DONE=1
			return
		fi
		addr=0x$(printf %x $addr)

# weed out non-function symbols
		if [[ $sym_type != t ]] && [[ $sym_type != T ]]; then
			[[ $print_warnings = 1 ]] &&
				echo "skipping $func address at $addr due to non-function symbol of type '$sym_type'"
			continue
		fi

# if the user provided a size, make sure it matches the symbol's size
		if [[ -n $size ]] && [[ $size -ne $sym_size ]]; then
			[[ $print_warnings = 1 ]] &&
				echo "skipping $func address at $addr due to size mismatch ($size != $sym_size)"
			continue;
		fi

# make sure the provided offset is within the symbol's range
		if [[ $offset -gt $sym_size ]]; then
			[[ $print_warnings = 1 ]] &&
				echo "skipping $func address at $addr due to size mismatch ($offset > $sym_size)"
			continue
		fi

# separate multiple entries with a blank line
		[[ $FIRST = 0 ]] && echo
		FIRST=0

# pass real address to addr2line
		echo "$func+$offset/$sym_size:"
		local file_lines=$(${ADDR2LINE} -fpie $objfile $addr | sed "s; $dir_prefix$\./$*; ;")
		[[ -z $file_lines ]] && return

if [[ $LIST = 0 ]]; then
			echo "$file_lines" | while read -r line
			do
				echo $line
			done
			DONE=1;
			return
		fi

# show each line with context
		echo "$file_lines" | while read -r line
		do
			echo
			echo $line
			n=$(echo $line | sed 's/.*:$[0-9]\+$.*/\1/g')
			n1=$[$n-5]
			n2=$[$n+5]
			f=$(echo $line | sed 's/.*at $.\+$:.*/\1/g')
			awk 'NR>=strtonum("'$n1'") && NR<=strtonum("'$n2'") { if (NR=='$n') printf(">%d<", NR); else printf(" %d ", NR); printf("\t%s\n", $0)}' $f
		done

DONE=1

done < <(${NM} -n $objfile | awk -v fn=$func -v end=$file_end '$3 == fn { found=1; line=$0; start=$1; next } found == 1 { found=0; print line, "0x"$1 } END {if (found == 1) print line, end; }')
}

[[ $# -lt 2 ]] && usage

objfile=$1

LIST=0
[[ "$objfile" == "--list" ]] && LIST=1 && shift && objfile=$1

[[ ! -f $objfile ]] && die "can't find objfile $objfile"
shift

DIR_PREFIX=supercalifragilisticexpialidocious
find_dir_prefix $objfile

FIRST=1
while [[ $# -gt 0 ]]; do
	func_addr=$1
	shift

# print any matches found
	DONE=0
	__faddr2line $objfile $func_addr $DIR_PREFIX 0

# if no match was found, print warnings
	if [[ $DONE = 0 ]]; then
		__faddr2line $objfile $func_addr $DIR_PREFIX 1
		warn "no match for $func_addr"
	fi
done

${this.title}

Code Editor : faddr2line