Gecko [ www.jdcpatala.org ]

Name	Size	Permission
a2disconf	15.89 KB	-rwxr-xr-x
a2dismod	15.89 KB	-rwxr-xr-x
a2dissite	15.89 KB	-rwxr-xr-x
a2enconf	15.89 KB	-rwxr-xr-x
a2enmod	15.89 KB	-rwxr-xr-x
a2ensite	15.89 KB	-rwxr-xr-x
a2query	9.64 KB	-rwxr-xr-x
aa-remove-unknown	3 KB	-rwxr-xr-x
aa-status	8.63 KB	-rwxr-xr-x
aa-teardown	139 B	-rwxr-xr-x
accessdb	14.38 KB	-rwxr-xr-x
acpid	59.02 KB	-rwxr-xr-x
add-shell	860 B	-rwxr-xr-x
addgnupghome	3 KB	-rwxr-xr-x
addgroup	36.9 KB	-rwxr-xr-x
adduser	36.9 KB	-rwxr-xr-x
agetty	67.38 KB	-rwxr-xr-x
apache2	692.07 KB	-rwxr-xr-x
apache2ctl	7.06 KB	-rwxr-xr-x
apachectl	7.06 KB	-rwxr-xr-x
apparmor_parser	1.46 MB	-rwxr-xr-x
apparmor_status	8.63 KB	-rwxr-xr-x
applygnupgdefaults	2.17 KB	-rwxr-xr-x
arp	69.3 KB	-rwxr-xr-x
arpd	78.27 KB	-rwxr-xr-x
arptables	215.32 KB	-rwxr-xr-x
arptables-nft	215.32 KB	-rwxr-xr-x
arptables-nft-restore	215.32 KB	-rwxr-xr-x
arptables-nft-save	215.32 KB	-rwxr-xr-x
arptables-restore	215.32 KB	-rwxr-xr-x
arptables-save	215.32 KB	-rwxr-xr-x
atd	30.01 KB	-rwxr-xr-x
badblocks	34.32 KB	-rwxr-xr-x
bcache-super-show	13.99 KB	-rwxr-xr-x
biosdecode	27.2 KB	-rwxr-xr-x
blkdeactivate	14.49 KB	-rwxr-xr-x
blkdiscard	34.23 KB	-rwxr-xr-x
blkid	118.26 KB	-rwxr-xr-x
blkzone	70.23 KB	-rwxr-xr-x
blockdev	66.23 KB	-rwxr-xr-x
bridge	102.3 KB	-rwxr-xr-x
cache_check	1.29 MB	-rwxr-xr-x
cache_dump	1.29 MB	-rwxr-xr-x
cache_metadata_size	1.29 MB	-rwxr-xr-x
cache_repair	1.29 MB	-rwxr-xr-x
cache_restore	1.29 MB	-rwxr-xr-x
cache_writeback	1.29 MB	-rwxr-xr-x
capsh	30.3 KB	-rwxr-xr-x
cfdisk	102.59 KB	-rwxr-xr-x
cgdisk	206.48 KB	-rwxr-xr-x
chcpu	46.23 KB	-rwxr-xr-x
check_forensic	952 B	-rwxr-xr-x
checksendmail	23.02 KB	-rwxr-xr-x
chgpasswd	66.2 KB	-rwxr-xr-x
chmem	62.23 KB	-rwxr-xr-x
chpasswd	58.2 KB	-rwxr-xr-x
chroot	42.34 KB	-rwxr-xr-x
clamd	210.41 KB	-rwxr-xr-x
clamonacc	194.41 KB	-rwxr-xr-x
cpgr	60.34 KB	-rwxr-xr-x
cppw	60.34 KB	-rwxr-xr-x
cron	54.63 KB	-rwxr-xr-x
cryptdisks_start	1.51 KB	-rwxr-xr-x
cryptdisks_stop	844 B	-rwxr-xr-x
cryptsetup	135.54 KB	-rwxr-xr-x
cryptsetup-reencrypt	105.32 KB	-rwxr-xr-x
ctrlaltdel	38.23 KB	-rwxr-xr-x
debugfs	225.8 KB	-rwxr-xr-x
delgroup	16.11 KB	-rwxr-xr-x
deluser	16.11 KB	-rwxr-xr-x
depmod	170.34 KB	-rwxr-xr-x
devlink	150.47 KB	-rwxr-xr-x
dhclient	508.98 KB	-rwxr-xr-x
dhclient-script	15.92 KB	-rwxr-xr-x
dmeventd	50.23 KB	-rwxr-xr-x
dmidecode	119 KB	-rwxr-xr-x
dmsetup	171.02 KB	-rwxr-xr-x
dmstats	171.02 KB	-rwxr-xr-x
dosfsck	58.08 KB	-rwxr-xr-x
dosfslabel	54.08 KB	-rwxr-xr-x
dovecot	98.4 KB	-rwxr-xr-x
dpkg-preconfigure	3.58 KB	-rwxr-xr-x
dpkg-reconfigure	4.34 KB	-rwxr-xr-x
dumpe2fs	30.38 KB	-rwxr-xr-x
e2freefrag	18.38 KB	-rwxr-xr-x
e2fsck	327.21 KB	-rwxr-xr-x
e2image	42.38 KB	-rwxr-xr-x
e2label	106.55 KB	-rwxr-xr-x
e2mmpstatus	30.38 KB	-rwxr-xr-x
e2scrub	7.13 KB	-rwxr-xr-x
e2scrub_all	5.27 KB	-rwxr-xr-x
e2undo	22.38 KB	-rwxr-xr-x
e4crypt	30.38 KB	-rwxr-xr-x
e4defrag	34.3 KB	-rwxr-xr-x
ebtables	215.32 KB	-rwxr-xr-x
ebtables-nft	215.32 KB	-rwxr-xr-x
ebtables-nft-restore	215.32 KB	-rwxr-xr-x
ebtables-nft-save	215.32 KB	-rwxr-xr-x
ebtables-restore	215.32 KB	-rwxr-xr-x
ebtables-save	215.32 KB	-rwxr-xr-x
era_check	1.29 MB	-rwxr-xr-x
era_dump	1.29 MB	-rwxr-xr-x
era_invalidate	1.29 MB	-rwxr-xr-x
era_restore	1.29 MB	-rwxr-xr-x
escapesrc	22.47 KB	-rwxr-xr-x
ethtool	375.05 KB	-rwxr-xr-x
etrn	5.96 KB	-rwxr-xr-x
faillock	14.15 KB	-rwxr-xr-x
fatlabel	54.08 KB	-rwxr-xr-x
fdformat	34.23 KB	-rwxr-xr-x
fdisk	150.27 KB	-rwxr-xr-x
filefrag	18.33 KB	-rwxr-xr-x
findfs	14.23 KB	-rwxr-xr-x
fixparts	74.48 KB	-rwxr-xr-x
fsadm	23.54 KB	-rwxr-xr-x
fsck	54.27 KB	-rwxr-xr-x
fsck.btrfs	1.16 KB	-rwxr-xr-x
fsck.cramfs	38.26 KB	-rwxr-xr-x
fsck.ext2	327.21 KB	-rwxr-xr-x
fsck.ext3	327.21 KB	-rwxr-xr-x
fsck.ext4	327.21 KB	-rwxr-xr-x
fsck.fat	58.08 KB	-rwxr-xr-x
fsck.minix	122.25 KB	-rwxr-xr-x
fsck.msdos	58.08 KB	-rwxr-xr-x
fsck.vfat	58.08 KB	-rwxr-xr-x
fsck.xfs	1.92 KB	-rwxr-xr-x
fsfreeze	14.23 KB	-rwxr-xr-x
fstab-decode	14.3 KB	-rwxr-xr-x
fstrim	70.23 KB	-rwxr-xr-x
gdisk	210.48 KB	-rwxr-xr-x
genccode	14.71 KB	-rwxr-xr-x
gencmn	14.75 KB	-rwxr-xr-x
genl	82.29 KB	-rwxr-xr-x
gennorm2	62.9 KB	-rwxr-xr-x
gensprep	26.8 KB	-rwxr-xr-x
getcap	14.3 KB	-rwxr-xr-x
getpcaps	14.3 KB	-rwxr-xr-x
getty	67.38 KB	-rwxr-xr-x
groupadd	90.95 KB	-rwxr-xr-x
groupdel	86.77 KB	-rwxr-xr-x
groupmems	62.24 KB	-rwxr-xr-x
groupmod	94.86 KB	-rwxr-xr-x
grpck	62.18 KB	-rwxr-xr-x
grpconv	58.05 KB	-rwxr-xr-x
grpunconv	58.05 KB	-rwxr-xr-x
grub-bios-setup	909.34 KB	-rwxr-xr-x
grub-install	1.11 MB	-rwxr-xr-x
grub-macbless	897.03 KB	-rwxr-xr-x
grub-mkconfig	8.54 KB	-rwxr-xr-x
grub-mkdevicemap	215.7 KB	-rwxr-xr-x
grub-probe	905.28 KB	-rwxr-xr-x
grub-reboot	4.73 KB	-rwxr-xr-x
grub-set-default	3.47 KB	-rwxr-xr-x
halt	973.23 KB	-rwxr-xr-x
hdparm	140.34 KB	-rwxr-xr-x
httxt2dbm	14.15 KB	-rwxr-xr-x
hwclock	102.35 KB	-rwxr-xr-x
iconvconfig	30.4 KB	-rwxr-xr-x
icupkg	23.07 KB	-rwxr-xr-x
ifconfig	85.11 KB	-rwxr-xr-x
init	1.55 MB	-rwxr-xr-x
insmod	170.34 KB	-rwxr-xr-x
installkernel	2.58 KB	-rwxr-xr-x
integritysetup	60.23 KB	-rwxr-xr-x
invoke-rc.d	16.64 KB	-rwxr-xr-x
ip	597.62 KB	-rwxr-xr-x
ip6tables	96.97 KB	-rwxr-xr-x
ip6tables-apply	6.89 KB	-rwxr-xr-x
ip6tables-legacy	96.97 KB	-rwxr-xr-x
ip6tables-legacy-restore	96.97 KB	-rwxr-xr-x
ip6tables-legacy-save	96.97 KB	-rwxr-xr-x
ip6tables-nft	215.32 KB	-rwxr-xr-x
ip6tables-nft-restore	215.32 KB	-rwxr-xr-x
ip6tables-nft-save	215.32 KB	-rwxr-xr-x
ip6tables-restore	96.97 KB	-rwxr-xr-x
ip6tables-restore-translate	215.32 KB	-rwxr-xr-x
ip6tables-save	96.97 KB	-rwxr-xr-x
ip6tables-translate	215.32 KB	-rwxr-xr-x
ipmaddr	17.99 KB	-rwxr-xr-x
iptables	96.97 KB	-rwxr-xr-x
iptables-apply	6.89 KB	-rwxr-xr-x
iptables-legacy	96.97 KB	-rwxr-xr-x
iptables-legacy-restore	96.97 KB	-rwxr-xr-x
iptables-legacy-save	96.97 KB	-rwxr-xr-x
iptables-nft	215.32 KB	-rwxr-xr-x
iptables-nft-restore	215.32 KB	-rwxr-xr-x
iptables-nft-save	215.32 KB	-rwxr-xr-x
iptables-restore	96.97 KB	-rwxr-xr-x
iptables-restore-translate	215.32 KB	-rwxr-xr-x
iptables-save	96.97 KB	-rwxr-xr-x
iptables-translate	215.32 KB	-rwxr-xr-x
iptunnel	25.99 KB	-rwxr-xr-x
irqbalance	62.92 KB	-rwxr-xr-x
irqbalance-ui	34.38 KB	-rwxr-xr-x
iscsi-iname	18.15 KB	-rwxr-xr-x
iscsi_discovery	5.16 KB	-rwxr-xr-x
iscsiadm	394.1 KB	-rwxr-xr-x
iscsid	410.3 KB	-rwxr-xr-x
iscsistart	366.29 KB	-rwxr-xr-x
isosize	30.23 KB	-rwxr-xr-x
kbdrate	13.99 KB	-rwxr-xr-x
killall5	26.38 KB	-rwxr-xr-x
kpartx	46.16 KB	-rwxr-xr-x
ldattach	34.23 KB	-rwxr-xr-x
ldconfig	387 B	-rwxr-xr-x
ldconfig.real	1 MB	-rwxr-xr-x
locale-gen	4.3 KB	-rwxr-xr-x
logrotate	82.09 KB	-rwxr-xr-x
logsave	14.16 KB	-rwxr-xr-x
losetup	110.34 KB	-rwxr-xr-x
lsmod	170.34 KB	-rwxr-xr-x
luksformat	3.32 KB	-rwxr-xr-x
lvchange	2.73 MB	-rwxr-xr-x
lvconvert	2.73 MB	-rwxr-xr-x
lvcreate	2.73 MB	-rwxr-xr-x
lvdisplay	2.73 MB	-rwxr-xr-x
lvextend	2.73 MB	-rwxr-xr-x
lvm	2.73 MB	-rwxr-xr-x
lvmconfig	2.73 MB	-rwxr-xr-x
lvmdiskscan	2.73 MB	-rwxr-xr-x
lvmdump	10.07 KB	-rwxr-xr-x
lvmpolld	232.05 KB	-rwxr-xr-x
lvmsadc	2.73 MB	-rwxr-xr-x
lvmsar	2.73 MB	-rwxr-xr-x
lvreduce	2.73 MB	-rwxr-xr-x
lvremove	2.73 MB	-rwxr-xr-x
lvrename	2.73 MB	-rwxr-xr-x
lvresize	2.73 MB	-rwxr-xr-x
lvs	2.73 MB	-rwxr-xr-x
lvscan	2.73 MB	-rwxr-xr-x
make-bcache	18.07 KB	-rwxr-xr-x
make-ssl-cert	3.78 KB	-rwxr-xr-x
mdadm	589.65 KB	-rwxr-xr-x
mdmon	325.49 KB	-rwxr-xr-x
mii-tool	26.46 KB	-rwxr-xr-x
mkdosfs	34.5 KB	-rwxr-xr-x
mke2fs	134.62 KB	-rwxr-xr-x
mkfs	14.23 KB	-rwxr-xr-x
mkfs.bfs	34.23 KB	-rwxr-xr-x
mkfs.btrfs	451.53 KB	-rwxr-xr-x
mkfs.cramfs	42.16 KB	-rwxr-xr-x
mkfs.ext2	134.62 KB	-rwxr-xr-x
mkfs.ext3	134.62 KB	-rwxr-xr-x
mkfs.ext4	134.62 KB	-rwxr-xr-x
mkfs.fat	34.5 KB	-rwxr-xr-x
mkfs.minix	106.23 KB	-rwxr-xr-x
mkfs.msdos	34.5 KB	-rwxr-xr-x
mkfs.ntfs	86.27 KB	-rwxr-xr-x
mkfs.vfat	34.5 KB	-rwxr-xr-x
mkfs.xfs	366.24 KB	-rwxr-xr-x
mkhomedir_helper	22.17 KB	-rwxr-xr-x
mkinitramfs	11.52 KB	-rwxr-xr-x
mklost+found	14.3 KB	-rwxr-xr-x
mkntfs	86.27 KB	-rwxr-xr-x
mkswap	106.23 KB	-rwxr-xr-x
modinfo	170.34 KB	-rwxr-xr-x
modprobe	170.34 KB	-rwxr-xr-x
mount.fuse	14.15 KB	-rwxr-xr-x
mount.lowntfs-3g	118.86 KB	-rwxr-xr-x
mount.ntfs	158.89 KB	-rwxr-xr-x
mount.ntfs-3g	158.89 KB	-rwxr-xr-x
mount.vmhgfs	46.48 KB	-rwxr-xr-x
mpathpersist	31.05 KB	-rwxr-xr-x
multipath	34.15 KB	-rwxr-xr-x
multipathd	126.2 KB	-rwxr-xr-x
nameif	18.14 KB	-rwxr-xr-x
netplan	798 B	-rwxr-xr-x
newusers	98.8 KB	-rwxr-xr-x
nfnl_osf	18.3 KB	-rwxr-xr-x
nologin	14.3 KB	-rwxr-xr-x
ntfsclone	58.27 KB	-rwxr-xr-x
ntfscp	42.26 KB	-rwxr-xr-x
ntfslabel	34.26 KB	-rwxr-xr-x
ntfsresize	78.27 KB	-rwxr-xr-x
ntfsundelete	54.26 KB	-rwxr-xr-x
on_ac_power	2.18 KB	-rwxr-xr-x
overlayroot-chroot	2.45 KB	-rwxr-xr-x
ownership	14.45 KB	-rwxr-xr-x
pam-auth-update	19.86 KB	-rwxr-xr-x
pam_extrausers_chkpwd	42.16 KB	-rwxr-sr-x
pam_extrausers_update	42.16 KB	-rwxr-xr-x
pam_getenv	2.82 KB	-rwxr-xr-x
pam_tally	14.16 KB	-rwxr-xr-x
pam_tally2	18.16 KB	-rwxr-xr-x
pam_timestamp_check	14.15 KB	-rwxr-xr-x
parted	86.25 KB	-rwxr-xr-x
partprobe	14.23 KB	-rwxr-xr-x
pdata_tools	1.29 MB	-rwxr-xr-x
pdns_server	4.68 MB	-rwxr-xr-x
pflogsumm	58.54 KB	-rwxr-xr-x
phpdismod	7.11 KB	-rwxr-xr-x
phpenmod	7.11 KB	-rwxr-xr-x
phpquery	6.24 KB	-rwxr-xr-x
pivot_root	14.23 KB	-rwxr-xr-x
plipconfig	14 KB	-rwxr-xr-x
plymouthd	146.41 KB	-rwxr-xr-x
popcon-largest-unused	543 B	-rwxr-xr-x
popularity-contest	5.23 KB	-rwxr-xr-x
postalias	22.15 KB	-rwxr-xr-x
postcat	22.22 KB	-rwxr-xr-x
postconf	187.63 KB	-rwxr-xr-x
postdrop	22.27 KB	-r-xr-sr-x
postfix	18.23 KB	-rwxr-xr-x
postfix-add-filter	4.9 KB	-rwxr-xr-x
postfix-add-policy	3.83 KB	-rwxr-xr-x
postkick	14.15 KB	-rwxr-xr-x
postlock	14.15 KB	-rwxr-xr-x
postlog	14.3 KB	-rwxr-xr-x
postmap	22.15 KB	-rwxr-xr-x
postmulti	30.54 KB	-rwxr-xr-x
postqueue	22.23 KB	-r-xr-sr-x
postsuper	30.48 KB	-rwxr-xr-x
posttls-finger	42.23 KB	-rwxr-xr-x
poweroff	973.23 KB	-rwxr-xr-x
pvchange	2.73 MB	-rwxr-xr-x
pvck	2.73 MB	-rwxr-xr-x
pvcreate	2.73 MB	-rwxr-xr-x
pvdisplay	2.73 MB	-rwxr-xr-x
pvmove	2.73 MB	-rwxr-xr-x
pvremove	2.73 MB	-rwxr-xr-x
pvresize	2.73 MB	-rwxr-xr-x
pvs	2.73 MB	-rwxr-xr-x
pvscan	2.73 MB	-rwxr-xr-x
pwck	58.17 KB	-rwxr-xr-x
pwconv	54.05 KB	-rwxr-xr-x
pwunconv	54.05 KB	-rwxr-xr-x
qmqp-sink	18.15 KB	-rwxr-xr-x
qmqp-source	22.16 KB	-rwxr-xr-x
qshape	12.55 KB	-rwxr-xr-x
rarp	40.45 KB	-rwxr-xr-x
raw	14.23 KB	-rwxr-xr-x
readprofile	22.26 KB	-rwxr-xr-x
reboot	973.23 KB	-rwxr-xr-x
remove-shell	904 B	-rwxr-xr-x
resize2fs	66.38 KB	-rwxr-xr-x
rmail	18.15 KB	-rwxr-xr-x
rmmod	170.34 KB	-rwxr-xr-x
rmt	58.55 KB	-rwxr-xr-x
rmt-tar	58.55 KB	-rwxr-xr-x
route	64.3 KB	-rwxr-xr-x
rsyslogd	710.2 KB	-rwxr-xr-x
rtacct	48.29 KB	-rwxr-xr-x
rtcwake	46.23 KB	-rwxr-xr-x
rtmon	78.24 KB	-rwxr-xr-x
runlevel	973.23 KB	-rwxr-xr-x
runuser	66.23 KB	-rwxr-xr-x
sasl-sample-server	22.56 KB	-rwxr-xr-x
saslauthd	102.8 KB	-rwxr-xr-x
sasldbconverter2	18.38 KB	-rwxr-xr-x
sasldblistusers2	18.38 KB	-rwxr-xr-x
saslpasswd2	14.37 KB	-rwxr-xr-x
saslpluginviewer	18.44 KB	-rwxr-xr-x
sendmail	34.3 KB	-rwxr-xr-x
sendmailconfig	21.17 KB	-rwxr-xr-x
sensible-mda	14.15 KB	-rwsr-xr-x
service	9.04 KB	-rwxr-xr-x
setcap	14.3 KB	-rwxr-xr-x
setvesablank	14.07 KB	-rwxr-xr-x
setvtrgb	14.13 KB	-rwxr-xr-x
sfdisk	138.23 KB	-rwxr-xr-x
sgdisk	190.48 KB	-rwxr-xr-x
shadowconfig	885 B	-rwxr-xr-x
shutdown	973.23 KB	-rwxr-xr-x
slattach	44.45 KB	-rwxr-xr-x
smtp-sink	35.09 KB	-rwxr-xr-x
smtp-source	30.17 KB	-rwxr-xr-x
split-logfile	2.36 KB	-rwxr-xr-x
sshd	863.79 KB	-rwxr-xr-x
start-stop-daemon	47.32 KB	-rwxr-xr-x
sulogin	50.23 KB	-rwxr-xr-x
swaplabel	18.23 KB	-rwxr-xr-x
swapoff	22.23 KB	-rwxr-xr-x
swapon	50.23 KB	-rwxr-xr-x
switch_root	14.23 KB	-rwxr-xr-x
sysctl	30.23 KB	-rwxr-xr-x
tarcat	936 B	-rwxr-xr-x
tc	529.45 KB	-rwxr-xr-x
tcpdump	1019.76 KB	-rwxr-xr-x
telinit	973.23 KB	-rwxr-xr-x
testsaslauthd	18.3 KB	-rwxr-xr-x
thin_check	1.29 MB	-rwxr-xr-x
thin_delta	1.29 MB	-rwxr-xr-x
thin_dump	1.29 MB	-rwxr-xr-x
thin_ls	1.29 MB	-rwxr-xr-x
thin_metadata_size	1.29 MB	-rwxr-xr-x
thin_repair	1.29 MB	-rwxr-xr-x
thin_restore	1.29 MB	-rwxr-xr-x
thin_rmap	1.29 MB	-rwxr-xr-x
thin_trim	1.29 MB	-rwxr-xr-x
tipc	126.23 KB	-rwxr-xr-x
tune2fs	106.55 KB	-rwxr-xr-x
tzconfig	106 B	-rwxr-xr-x
ufw	4.82 KB	-rwxr-xr-x
unix_chkpwd	42.15 KB	-rwxr-sr-x
unix_update	42.15 KB	-rwxr-xr-x
update-ca-certificates	5.29 KB	-rwxr-xr-x
update-grub	64 B	-rwxr-xr-x
update-grub-gfxpayload	301 B	-rwxr-xr-x
update-grub2	64 B	-rwxr-xr-x
update-info-dir	1.66 KB	-rwxr-xr-x
update-initramfs	7.25 KB	-rwxr-xr-x
update-locale	2.99 KB	-rwxr-xr-x
update-mime	9.18 KB	-rwxr-xr-x
update-passwd	34.56 KB	-rwxr-xr-x
update-pciids	1.71 KB	-rwxr-xr-x
update-rc.d	16.76 KB	-rwxr-xr-x
upgrade-from-grub-legacy	1.49 KB	-rwxr-xr-x
useradd	143.71 KB	-rwxr-xr-x
userdel	98.89 KB	-rwxr-xr-x
usermod	139.49 KB	-rwxr-xr-x
uuidd	42.3 KB	-rwxr-xr-x
validlocale	1.73 KB	-rwxr-xr-x
vcstime	13.99 KB	-rwxr-xr-x
veritysetup	51.82 KB	-rwxr-xr-x
vgcfgbackup	2.73 MB	-rwxr-xr-x
vgcfgrestore	2.73 MB	-rwxr-xr-x
vgchange	2.73 MB	-rwxr-xr-x
vgck	2.73 MB	-rwxr-xr-x
vgconvert	2.73 MB	-rwxr-xr-x
vgcreate	2.73 MB	-rwxr-xr-x
vgdisplay	2.73 MB	-rwxr-xr-x
vgexport	2.73 MB	-rwxr-xr-x
vgextend	2.73 MB	-rwxr-xr-x
vgimport	2.73 MB	-rwxr-xr-x
vgimportclone	2.73 MB	-rwxr-xr-x
vgmerge	2.73 MB	-rwxr-xr-x
vgmknodes	2.73 MB	-rwxr-xr-x
vgreduce	2.73 MB	-rwxr-xr-x
vgremove	2.73 MB	-rwxr-xr-x
vgrename	2.73 MB	-rwxr-xr-x
vgs	2.73 MB	-rwxr-xr-x
vgscan	2.73 MB	-rwxr-xr-x
vgsplit	2.73 MB	-rwxr-xr-x
vigr	68.55 KB	-rwxr-xr-x
vipw	68.55 KB	-rwxr-xr-x
visudo	218.2 KB	-rwxr-xr-x
vpddecode	18.58 KB	-rwxr-xr-x
wipefs	46.23 KB	-rwxr-xr-x
xfs_admin	1.38 KB	-rwxr-xr-x
xfs_bmap	695 B	-rwxr-xr-x
xfs_copy	90.28 KB	-rwxr-xr-x
xfs_db	620.09 KB	-rwxr-xr-x
xfs_estimate	14.01 KB	-rwxr-xr-x
xfs_freeze	800 B	-rwxr-xr-x
xfs_fsr	42.02 KB	-rwxr-xr-x
xfs_growfs	34.14 KB	-rwxr-xr-x
xfs_info	1.26 KB	-rwxr-xr-x
xfs_io	187.34 KB	-rwxr-xr-x
xfs_logprint	74.15 KB	-rwxr-xr-x
xfs_mdrestore	30.02 KB	-rwxr-xr-x
xfs_metadump	782 B	-rwxr-xr-x
xfs_mkfile	1.02 KB	-rwxr-xr-x
xfs_ncheck	685 B	-rwxr-xr-x
xfs_quota	86.01 KB	-rwxr-xr-x
xfs_repair	563.15 KB	-rwxr-xr-x
xfs_rtcp	17.99 KB	-rwxr-xr-x
xfs_scrub	102.11 KB	-rwxr-xr-x
xfs_scrub_all	5.86 KB	-rwxr-xr-x
xfs_spaceman	42.15 KB	-rwxr-xr-x
xtables-legacy-multi	96.97 KB	-rwxr-xr-x
xtables-monitor	215.32 KB	-rwxr-xr-x
xtables-nft-multi	215.32 KB	-rwxr-xr-x
zerofree	9.99 KB	-rwxr-xr-x
zic	62.29 KB	-rwxr-xr-x
zramctl	114.34 KB	-rwxr-xr-x

Code Editor : checksendmail

#!/usr/bin/perl

#	BSDI	$Id: checksendmail.perl,v 1.1.1.1 1994/01/13 21:15:31 polk Exp $

# checksendmail
#
#	The checksendmail program is a perl script that aids the testing
#	of sendmail's various configuration filse.  checksendmail 
#	passes typical addresses (supplied in input files) through
#	sendmail and prints the result of the resolution and 
#	transformation routines. 
#
#			Gene Kim & Rob Kolstad & Jeff Polk, 7/11/90
#			Modified by Robert Harker, 11/14/00

# --	-a show aliasing of local addresses
# --	-d preceed each line with ruleset sequence summary
# --    -C config_file
# --	-b sendmail_binary
# --    -l log_file of results of tests
# --    -r resolve_addresses_file
# --	-T test one address

# defaults:
	$resolve  = "/etc/mail/address.resolve";
	$cffile   = "/etc/mail/sendmail.cf";

# Pre-create tmp files (so can use safely)
	use Fcntl;
	foreach ("/tmp/csm$$", "/tmp/csm.in$$") {
		die "Can't pre-create $_" 
			unless sysopen(T,$_,O_RDWR|O_CREAT|O_EXCL,0600)
			and close(T);
	};

sub usage {
	die "Usage: checksendmail [-C cffile.cf] [-b sendmail_binary] [-l log_file]\n\t\t\t\t[-a] [-d] [-r resolve_addrs_file || -T one\@test.addr]\n$errormsg\n";
}

for (unshift (@ARGV, "XX"); $#ARGV > 0; shift ARGV) {
	if ($ARGV[1] eq "-C") 
	{
		if ($setcffile & 1) { die "Can only set `cffile.cf' once"; }
		shift @ARGV;
		if ($#ARGV >= 1) {$cffile = $ARGV[1]; }
		else {
			$errormsg = "No sendmail.cf file given for -C flag\n";
			&usage();
		}
		$setcffile += 1;
	}
	elsif ($ARGV[1] eq "-r")
	{
		if ($setfile & 1) { die "Can only set `resolve' once"; }
		shift @ARGV;
		if ($#ARGV < 1) {
			$errormsg = "No resolve_addrs_file given for -r flag\n";
			&usage();
		}
		$resolve = $ARGV[1];
		$setfile += 1;
	}
	elsif ($ARGV[1] eq "-T")
	{
		if ($setfile) { die "Can't set other files and use -T"; }
		shift @ARGV;
		if ($#ARGV < 1) {
			$errormsg = "No one\@test.addr given for -T flag\n";
			&usage();
		}
		open (OUT, ">/tmp/csm.in$$") ||
					die "Can't open >/tmp/csm.in$$";
		$resolve = "/tmp/csm.in$$";
		print OUT "$ARGV[1]\n";
		close (OUT);
		$setfile = 7;
	}
	elsif ($ARGV[1] eq "-b")
	{
		if ($setbin & 1) { die "Can only set `sendmail_binary' once"; }
		shift @ARGV;
		if ($#ARGV >= 1) {$sendmail = $ARGV[1]; }
		else {
			$errormsg = "No sendmail_binary file given for -b flag\n";
			&usage();
		}
		$setbin += 1;
	}
	elsif ($ARGV[1] eq "-l")
	{
		if ($setlog & 1) { die "Can only set `log_file' once"; }
		shift @ARGV;
		if ($#ARGV >= 1) {$logfile = $ARGV[1]; }
		else {
			$errormsg = "No log_file file given for -l flag\n";
			&usage();
		}
		$setlog += 1;
	}
	elsif ($ARGV[1] eq "-a")
	{
		$doaliasing += 1;
	}
	elsif ($ARGV[1] eq "-d")
	{
		$dorspath += 1;
	}
	else { &usage(); }
}

# Figure out where the sendmail binary is
if (! $setbin & 1) {
  foreach $i ("/usr/sbin/sendmail", "/usr/libexec/sendmail", "/usr/lib/sendmail")
  {
	# test if binary exists and is executable
	if ((-e $i) && (-x $i)) { 
		$sendmail = $i;
		last;
	}
  }
}

# Figure out the version of sendmail and the location of the sendmail.cf file
# sendmail -d0.10 -bv root
#	("-bv root" is just to give sendmail something to chew on)

$binversion = `$sendmail -d0.10 -bv root | grep "^Version "`;
chop $binversion;
$binversion =~ s/^Version //;

# Get the major relase number from the sendmail version
$binver = $binversion;
$binver =~ s/^8\.//;
$binver =~ s/\..+//;

# if the cf file was not set on the command line,
#	find out where the binary looks for it
if ( ! -e $cffile ) {
	$cffile = `$sendmail -d0.10 -bv root | grep "Def Conf file:"`;
	chop $cffile;
	$cffile =~ s/ //g;
	$cffile =~ s/	//g;
	$cffile =~ s/^DefConffile://;
}

if (!-e $cffile)   { die "Can't find configuration file $cffile\n"; }

if (!-e $resolve)  { die "Can't find name file $resolve\n"; }

# Figure out the version of the sendmail.cf file
# Look for the V line
$cfversion = `grep "^V" $cffile`;
chop $cfversion;
# if $cfversion is empty, then the configuration is sendmail 5, not sendmail 8
$cfversion =~ s/^$/V0/;

# Get the version number from the V line
$cfver = $cfversion;
$cfver =~ s/^V//;
$cfver =~ s'/.+'';

# check that the binary is a higher version than config file
if ( $binver < $cfver + 1) {
    die "$cffile version ($cfversion) is more advanced than $sendmail version ($binversion)\n";
}

# figure out where the mqueue directory is
if ( $cfver <= 6 ) {
	$maildir = `grep "^OQ" $cffile`;
	chop $maildir;
	$maildir =~ s/^OQ//;
} else {
	$maildir = `grep "^O QueueDirectory" $cffile`;
	chop $maildir;
	$maildir =~ s/^O QueueDirectory=//;
}

# make sure the user can access the ../mqueue directory
if ((!-r $maildir) || (!-x $maildir) || (!-w $maildir)) { 
	if ($doaliasing & 1) {
	  die "checksendmail: can't access $maildir! can't use checksendmail's -a flag\n";
	} else {
	  warn "checksendmail: can't access $maildir!  trying anyway...\n";
	}
}

chop($hostname = `hostname`);
chop($pwd = `pwd`);
print "system: $hostname\t\tcurrent dir: $pwd\n";
print "resolve file: $resolve\n";
print "sendmail binary: $sendmail\t\tsendmail version: $binversion\n";
print "config file: $cffile\t\tconfig file version: $cfversion\n\n";
if ($setlog & 1) {
  print "log file: $logfile\n\n";
  # now print to the log file
  open (LOG , ">$logfile") || die "Can't open >$logfile";
  print LOG "system: $hostname\t\tcurrent dir: $pwd\n";
  print LOG "resolve file: $resolve\n";
  print LOG "sendmail binary: $sendmail\t\tsendmail version: $binversion\n";
  print LOG "config file: $cffile\t\tconfig file version: $cfversion\n";
  print LOG "log file: $logfile\n\n";
}

sub handler {  # 1st argument is signal name
     local($sig) = @_;
     print STDERR "Caught a SIG$sig--shutting down\n";
     unlink("/tmp/csm$$") || die "Can't unlink /tmp/csm$$";
     unlink("/tmp/csm.in$$");
     if ($setlog & 1) {
       close(LOG);
     }
     exit(0);
}

$SIG{'INT'} = 'handler';
$SIG{'QUIT'} = 'handler';

# glean the mailers used from the rule 0 tests

sub parseresolve
{
     while (<MAIL>)
     {
	# now print to the log file
	if ($setlog & 1) {
	  print LOG $_;
	}
	if (/^ADDRESS TEST MODE/) { next; }
	if (/^Enter <ruleset>/) { next; }
	if (/^Warning: .cf file is out of date/) { next; }

# if the binary is less than 8.7 then use result of ruleset 0
	if ( $binver <= 6 ) {
	  if (/^>/)			# INPUT LINE! (and last output is done)
	  {
	    chop;
	    if ($prevline) {	# OUTPUT LINE!
	      &printparseresolve;
	    }
	    s/> *[0-9,]* *//g;
	    s/.*input: *//;
	    s/ //g;
	    s/"//g;
	    $input = $_;
	  }
	  else { chop; }
	  $prevline = $_;
	} else {
	  # format of /parse output is:
	  #       Parsing envelope recipient address
	  #       rewrite: ruleset   3   input: harker @ harker . com
	  if ($prevrule eq "Parsing envelope recipient address\n" )
	  {
	    chop;
	    s/> *[0-9,]* *//g;
	    s/.*input: *//;
	    s/ //g;
	    s/"//g;
	    $input = $_;
	    $prevrule = $_;
	  }
	  elsif (/^mailer /)
	  {
	    $prevrule = $_;
	    &printparseresolve;
	  }
	  else
	  {
	    $prevrule = $_;
	  }
	}
     }
    #&printparseresolve;
}

sub printparseresolve {
	# if the binary is less than 8.7 then use result of ruleset 0
	if ( $binver <= 6 ) {
	  if ($input eq "") { return;}

$prevline =~ s/.*returns:  *//;
	  $prevline =~ s/"//g;
	  $prevline =~ s/ //g;
	  # Don't strip spaces off error messages
	  $prevline =~ s/ *([.!%<>]) */$1/g;
	  $prevline =~ s/ +([;?\$])/$1/g;
	  $prevline =~ s/([#\@:]) +/$1/g;

# non-Sun test mode delimiters -> easily-readable style
# Mark Sausville, MIT Media Laboratory, saus@media-lab.media.mit.edu
	  $prevline =~ s/\^V/\$#/;
	  $prevline =~ s/\^W/\$@/;
	  $prevline =~ s/\^X/\$:/;

#### $#ether$@sun-barr.Ebay.Sun.COM$:site!user@uunet.uu.NET
	  @t = split( '\$', $prevline);
	  $address = "XXX";
	  $remote = "XXX";
	  $mailer = "XXX";
	  for ($i = 1; $i <= $#t; $i++)
	  {
	    if (substr($t[$i], 0, 1) eq ":")
	      { $address = substr($t[$i], 1,999); }
	    if (substr($t[$i], 0, 1) eq "@")
	      { $remote = substr($t[$i], 1,999); }
	    if (substr($t[$i], 0, 1) eq "#")
	      { $mailer =  substr($t[$i], 1,999);
		$mailer =~ tr/A-Z/a-z/; }
	   }
	} else {
	# the binary is at least 8.7 then use result of /parse
	  chop;
	  s/,//g;

# mailer esmtp, host harker.com., user harker@harker.com
	  @t = split( ' ', $_);
	  $address = "XXX";
	  $remote = "XXX";
	  $mailer = "XXX";
	  for ($i = 0; $i <= $#t; $i++)
	  {
	    if ($t[$i] eq "user")
	      { $address = $t[++$i]; }
	    if ($t[$i] eq "host")
	      { $remote = $t[++$i]; }
	    if ($t[$i] eq "mailer")
	      { $mailer = $t[++$i];
		$mailer =~ tr/A-Z/a-z/; }
	   }
	}
	printf("%-27.27s --(%-6.6s)-->  %s[%s]\n", $input, $mailer,
			$address, $remote);
	# now print to the log file
	if ($setlog & 1) {
	  printf LOG ("%-27.27s --(%-6.6s)-->  %s[%s]\n\n", $input, $mailer,
			$address, $remote);
	}

if ($doaliasing & 1) {
	  # If the /etc/mail/address.resolved to the local mailer,
	  #	then expand the username as an alias
	  if ( $mailer eq  "local")
	  {
	    $setalias = $aliasfound = 0;
	    $laddress = $address;
	    $sendmailprog = "$sendmail -bv -C$cffile $laddress|";
	    open(LOCAL, $sendmailprog) ||
					die "can't exec $sendmailprog...\n";
	    # now print to the log file
	    if ($setlog & 1) {
	      print LOG "\n$sendmailprog\n";
	    }
	    while (<LOCAL>)
	    {
	      # now print to the log file
	      if ($setlog & 1) {
  	        print LOG $_;
	      }
	      chop;
	      if (/unknown/)
	      {
		$aliasfound = 1;
		printf("\t\t aliased to --(error )-->  %s\n", $_);
		# now print to the log file
		if ($setlog & 1) {
		  printf LOG ("\t\t aliased to --(error )-->  %s\n\n", $_);
		}
		next;
	      }
	      s/,//g;
	      @l = split( ' ', $_);
	      $aladdress = "XXX";
	      $remote = "XXX";
	      $mailer = "XXX";
	      for ($i = 1; $i <= $#l; $i++)
	      {
		# ./sendmail -bv -C./sendmail.cf j.murphy
		# j.murphy@pop.mcit.com... deliverable: mailer mciesmtp,
		#	host pop.mcit.com, user j.murphy@pop.mcit.com
		if ($l[$i] eq "user") { $aladdress = $l[++$i]; }
		if ($l[$i] eq "host") { $remote = $l[++$i]; }
		if ($l[$i] eq "mailer") { $mailer = $l[++$i]; }
	      }
	      if (("$laddress" eq "$aladdress") && ($aliasfound == 0)) {
		$selfalias = 1;
		next;
	      }
	      printf("\t\t aliased to --(%-6.6s)-->  %s[%s]\n",
				$mailer, $aladdress, $remote);
	      # now print to the log file
	      if ($setlog & 1) {
		printf LOG ("\t\t aliased to --(%-6.6s)-->  %s[%s]\n\n",
				$mailer, $aladdress, $remote);
	      }
	      if ("$laddress" ne "$aladdress") {
		$aliasfound = 1;
	        $envsenderaddrs .= " $aladdress";
	      }
	      if ($mailer ne "XXX") { $themailers{$mailer}=1;}
	    }
	    close(LOCAL);
	    if ($selfalias == 1 && $aliasfound == 1) {
	      printf("\t\t aliased to --(%-6.6s)-->  %s[%s]\n",
				$mailer, $aladdress, $remote);
	      # now print to the log file
	      if ($setlog & 1) {
		printf LOG ("\t\t aliased to --(%-6.6s)-->  %s[%s]\n\n",
				$mailer, $aladdress, $remote);
	      }
	    }
	    # now print a blank line to the log file
	    if ($setlog & 1) {
	      print LOG "\n";
	    }
	  } else {
	      $envsenderaddrs .= " $address";
	  }
	}

if ($mailer ne "XXX") { $themailers{$mailer}.="$input ";}
}

# Parse output of sendmail name resolution

sub parseaddress
{
##   ADDRESS TEST MODE
##   Enter <ruleset> <address>
##   > rewrite: ruleset  3   input: "user"

open(MAIL, $_[0]) || die "Can't open $_[0]...\n";
    local ($k, $address, $prevline, $mailer, $remote, $input);
    print $_[1];			# the title
    # now print to the log file
    if ($setlog & 1) {
         print LOG "\n$_[1]";			# the title
    }

$done = 0;
    while (<MAIL>)
    {
	# now print to the log file
	if ($setlog & 1) {
	  print LOG $_;
	}
	if (/^>  *$/) { $done = 1; }
	if (/^ADDRESS TEST MODE/) { next; }
	if (/^Enter <ruleset>/) { next; }
	if (/^Warning: .cf file is out of date/) { next; }
	if (/^$/) { next; }
	chop;
	# rewrite $rules to be just a slash if it starts with a /
	$rules =~ s'/.+'/';
	# if the binary is less than 8.7 then use result of ruleset 4
	if ( $binver <= 6 || $rules ne "/" ) {
	  if (/^>/)			# INPUT LINE! (and last output is done)
	  {
		if ($prevline) {	# OUTPUT LINE!
		    $prevline =~ s/.*returns:  *//;
		    $prevline =~ s/"//g;
		    $prevline =~ s/ //g;
#> rewrite: ruleset  3   input: "site" "!" "user" "@" "uunet" "." "uu" "." "net"
#rewrite: ruleset  8   input: "site" "!" "user" "@" "uunet" "." "uu" "." "net"
#> 
		    printf("%s%-24.24s ---->  %s\n", $rspath, $input, $prevline);
		    # now print to the log file
		    if ($setlog & 1) {
		      printf LOG ("%s%-24.24s ---->  %s\n", $rspath, $input, $prevline);
		    }
		}
	    s/> *[0-9,]* *//g;
	    s/.*input: *//;
	    s/ //g;
	    s/"//g;
	    $input = $_;
	  }
	  last if $done;
	  $prevline = $_;
	} else {
	  # format of /try output is:
	  #   Trying envelope recipient address harker for mailer esmtp
	  #   ...
	  #   Rcode = 0, addr = harker@mailhub.gadget.com
	  # remove extra ">" from "> >" lines
	  s/^> >/>/;
	  if (/^> Trying/)		# INPUT LINE! (and last output is done)
	  {
	    chop;
	    s/> Trying .+ address //;
	    s/ for mailer .+//;
	    s/ //g;
	    s/"//g;
	    $input = $_;
	    $prevrule = $_;
	  }
	  elsif (/^Rcode = /)
	  {
	    $prevrule = $_;
	    #   Rcode = 0, addr = harker@mailhub.gadget.com
	    s/^Rcode = .+ addr = //;
	    printf("%s%-24.24s ---->  %s\n", $rspath, $input, $_);
	    # now print to the log file
	    if ($setlog & 1) {
	      printf LOG ("%s%-24.24s ---->  %s\n\n", $rspath, $input, $_);
	    }
	  }
	  else
	  {
	    $prevrule = $_;
	  }
	}
    }
    # now print to the log file
    if ($setlog & 1) {
         print LOG "\n";
    }
    close(MAIL);
}

# if the binary is less than 8.7 then use result of ruleset 4
if ( $binver <= 6 ) {
  print "Mail address resolution (rule 0)\n";
  # now print to the log file
  if ($setlog & 1) {
    print LOG "Mail address resolution (rule 0)\n";
  }
} else {
  print "Mail address resolution (/parse)\n";
  # now print to the log file
  if ($setlog & 1) {
    print LOG "Mail address resolution (/parse)\n";
  }
}
# pass names from resolve files to sendmail

open(IN, $resolve) || die "can't open $resolve\n";
open(OUT, ">/tmp/csm$$") || die "can't open >/tmp/csm$$\n";
while (<IN>) 
{
    /^$/ && next;
    /^#/ && next;
    # if the binary is less than 8.7 then use result of ruleset 0
    if ( $binver == 5 ) {
	$rules = "0 $_";
    } elsif ( $binver <= 6 ) {
	$rules = "3,0 $_";
    } else {
	$rules = "/parse $_";
    }
    print OUT $rules;
    # now print to the log file
    if ($setlog & 1) {
      print LOG "$rules";
    }
    chop;
    $allinput .= " $_";
}
    $allinput =~ s/^ //;
close(OUT);
close(IN);
$sendmailprog = "$sendmail -bt -C$cffile < /tmp/csm$$|";
open(MAIL, $sendmailprog) || die "can't exec $sendmailprog...\n";
&parseresolve();

# calculate $f
    $sendmailprog = "|$sendmail -bt -C$cffile > /tmp/csm$$";
    open (OUT, $sendmailprog);
    open (IN, $resolve);
    # sendmail 5 automatically runs ruleset 3
    if ( $binver == 5 ) {
	$rules = "1,4";
    } else {
	$rules = "3,1,4";
    }
    if ($dorspath & 1) { $rspath = "\$f: "; }

while (<IN>) {
	chop;
	/^$/ && next;
	/^#/ && next;
	$address = $_;
	print OUT "$rules $address\n";
        # now print to the log file
        if ($setlog & 1) {
	    print LOG "$rules $address\n";
        }
    }
    print OUT "\n";			# stuff last line into sendmail
    # now print to the log file
    if ($setlog & 1) {
	print LOG "\n";			# stuff last line into sendmail
    }
    close(IN);
    close(OUT);
    &parseaddress ("/tmp/csm$$", "\n\$f address header transformations\n");

# Get the R= and S= special rulesets from the configuration
# now print to the log file
if ($setlog & 1) {
  print LOG "\nGet the R= and S= mailer specific rulesets\n";
}

open(FID, "grep ^M $cffile|");
while (<FID>)
{
#    Mether,	P=[IPC], F=msDFMueCX, S=11, R=21, A=IPC $h
    chop;
    $thisline = $_;
    $thisline =~ s/M//;
    $thisline =~ s/,.*//;
    $thisline =~ tr/A-Z/a-z/;
    $sendrule = $_;
    $sendrule =~ s/.*S=//;
    $sendrule =~ s/,.*//;
    if ($sendrule=~q!/!) {
      ($esendrule, $hsendrule) = split (q!/!, $sendrule);
    } else {
      $esendrule = $hsendrule = $sendrule;
    }
    $recvrule = $_;
    $recvrule =~ s/.*R=//;
    $recvrule =~ s/,.*//;
    if ($recvrule=~q!/!) {
      ($erecvrule, $hrecvrule) = split (q!/!, $recvrule);
    } else {
      $erecvrule = $hrecvrule = $recvrule;
    }
    $esendrules{$thisline} = $esendrule;
    $hsendrules{$thisline} = $hsendrule;
    $erecvrules{$thisline} = $erecvrule;
    $hrecvrules{$thisline} = $hrecvrule;
    # now print to the log file
    if ($setlog & 1) {
      print LOG "mailer: $thisline\t->\tesendrule = $esendrule, hsendrule = $hsendrule,
    		erecvrule = $erecvrule, hrecvrule = $hrecvrule\n";
    }
}
# now print to the log file
if ($setlog & 1) {
  print LOG "\n";
}
close(FID);

# pass envelope recipient names from various mailers through sendmail
foreach $i (keys %themailers)
{
    $sendmailprog = "|$sendmail -bt -C$cffile > /tmp/csm$$";
    open (OUT, $sendmailprog);
    if ($dorspath & 1) { $rspath = "$i ER: "; }

# if the binary is less than 8.7 then use result of ruleset 0
    if ( $binver <= 6 ) {
      if ($erecvrules{$i} == 0) {
	print "\nCan't find recv rule for `$i', skipping this mailer <-------------------\n";
	next;
      }
      # sendmail 5 automatically runs ruleset 3
      if ( $binver == 5 ) {
	$rules = "2,$erecvrules{$i},4";
      } else {
	$rules = "3,2,$erecvrules{$i},4";
      }
    } else {
      print OUT "/tryflags ER\n";
      # now print to the log file
      if ($setlog & 1) {
	print LOG "/tryflags ER\n";
      }
      $rules = "/try $i";
    }
    @namelist = split(/ /, $allinput);
    foreach (@namelist) {
	print OUT "$rules $_\n";
    	# now print to the log file
    	if ($setlog & 1) {
      	  print LOG "$rules $_\n";
    }
    }
    print OUT "\n";			# stuff last line into sendmail
    # now print to the log file
    if ($setlog & 1) {
      	print LOG "\n";			# stuff last line into the log
    }
    close(OUT);
    $note = "";
    if ($erecvrules{$i} eq $hrecvrules{$i}) { $note = "and header "; }
    &parseaddress ("/tmp/csm$$", "\n`To' envelope ${note}address transformations for mailer $i [$rules]:\n");
}

# pass header recipient names from various mailers through sendmail
foreach $i (keys %themailers)
{
    $sendmailprog = "|$sendmail -bt -C$cffile > /tmp/csm$$";
    open (OUT, $sendmailprog);
    if ($dorspath & 1) { $rspath = "$i HR: "; }

# only run the header ruleset if the mailer uses split env/hdr rulesets
    if ($hrecvrules{$i} ne $erecvrules{$i}) {
      # if the binary is less than 8.7 then use result of ruleset 0
      if ( $binver <= 6 ) {
	if ($hrecvrules{$i} == 0) {
	  print "\nCan't find recv rule for `$i', skipping this mailer <-------------------\n";
	  next;
	}
	# sendmail 5 automatically runs ruleset 3
	if ( $binver == 5 ) {
	  $rules = "2,$hrecvrules{$i},4";
	} else {
	  $rules = "3,2,$hrecvrules{$i},4";
	}
      } else {
	print OUT "/tryflags HR\n";
      # now print to the log file
      if ($setlog & 1) {
	print LOG "/tryflags HR\n";
      }
	$rules = "/try $i";
      }
      @namelist = split(/ /, $allinput);
      foreach (@namelist) {
	print OUT "$rules $_\n";
        # now print to the log file
        if ($setlog & 1) {
	  print LOG "$rules $_\n";
      }
      }
      print OUT "\n";			# stuff last line into sendmail
      # now print to the log file
      if ($setlog & 1) {
      	  print LOG "\n";			# stuff last line into the log
      }
      close(OUT);
      &parseaddress ("/tmp/csm$$", "\n`To' header address transformations for mailer $i [$rules]:\n");
    }
}

# pass envelope sender names from various mailers through sendmail
foreach $i (keys %themailers)
{
    $sendmailprog = "|$sendmail -bt -C$cffile > /tmp/csm$$";
    open (OUT, $sendmailprog);
    if ($dorspath & 1) { $rspath = "$i ES: "; }

# if the binary is less than 8.7 then use result of ruleset 0
    if ( $binver <= 6 ) {
      if ($esendrules{$i} == 0) {
	print "\nCan't find send rule for `$i', skipping this mailer <-------------------\n";
	next;
      }
      # sendmail 5 automatically runs ruleset 3
      if ( $binver == 5 ) {
	$rules = "2,$esendrules{$i},4";
      } else {
	$rules = "3,2,$esendrules{$i},4";
      }
    } else {
      print OUT "/tryflags ES\n";
      # now print to the log file
      if ($setlog & 1) {
	print LOG "/tryflags ES\n";
      }
      $rules = "/try $i";
    }
    @namelist = split(/ /, $allinput);
    foreach (@namelist) {
	print OUT "$rules $_\n";
        # now print to the log file
        if ($setlog & 1) {
	  print LOG "$rules $_\n";
    }
    }
    print OUT "\n";			# stuff last line into sendmail
    close(IN);
    close(OUT);
    $note = "";
    if ($esendrules{$i} eq $hsendrles{$i}) {$note = "and header ";}
    &parseaddress ("/tmp/csm$$", "\n`From' envelope ${note}address transformations for mailer $i [$rules]:\n");
}

# pass header sender names from various mailers through sendmail
foreach $i (keys %themailers)
{
    $sendmailprog = "|$sendmail -bt -C$cffile > /tmp/csm$$";
    open (OUT, $sendmailprog);
    if ($dorspath & 1) { $rspath = "$i HS: "; }

# only run the header ruleset if the mailer uses split env/hdr rulesets
    if ($hsendrules{$i} ne $esendrules{$i}) {
      # if the binary is less than 8.7 then use result of ruleset 0
      if ( $binver <= 6 ) {
	if ($hsendrules{$i} == 0) {
	  print "\nCan't find send rule for `$i', skipping this mailer <-------------------\n";
	  next;
	}
	# sendmail 5 automatically runs ruleset 3
	if ( $binver == 5 ) {
	  $rules = "2,$hsendrules{$i},4";
	} else {
	  $rules = "3,2,$hsendrules{$i},4";
	}
      } else {
	print OUT "/tryflags HS\n";
      # now print to the log file
      if ($setlog & 1) {
	print LOG "/tryflags HR\n";
      }
	$rules = "/try $i";
      }
      @namelist = split(/ /, $allinput);
      foreach (@namelist) {
	  print OUT "$rules $_\n";
          # now print to the log file
          if ($setlog & 1) {
	    print LOG "$rules $_\n";
      }
    }
      print OUT "\n";			# stuff last line into sendmail
      close(IN);
      close(OUT);
      &parseaddress ("/tmp/csm$$", "\n`From' address header transformations for mailer $i [$rules]:\n");
    }
}

foreach $i (keys %themailers)
{
    $sendmailprog = "|$sendmail -bt -C$cffile > /tmp/csm$$";
    open (OUT, $sendmailprog);
    if ($dorspath & 1) { $rspath = "\$g: "; }

# if the binary is 8.9 or below then check if the mailer
    #	specific ruleset exists
    if ( $binver <= 9 ) {
    # if the binary is less than 8.7 then use result of ruleset 0
      if ($esendrules{$i} == 0) {
	print "\nCan't find send rule for `$i', skipping this mailer <-------------------\n";
	next;
      }
    }
    # sendmail 5 automatically runs ruleset 3
    if ( $binver == 5 ) {
      $rules = "1,4,3,1,$hsendrules{$i},4"; # XXX esendrules? book p. 431???
    } else {
      $rules = "3,1,4,3,1,$hsendrules{$i},4"; # XXX esendrules? book p. 431???
    }
    open (IN, $resolve);
    while (<IN>) {
	chop;
	/^$/ && next;
	/^#/ && next;
	$address = $_;
	print OUT "$rules $address\n";
    }
    print OUT "\n";			# stuff last line into sendmail
    close(IN);
    close(OUT);
    $note = "";
    if ($esendrules{$i} eq $hsendrles{$i}) {$note = "and header ";}
    &parseaddress ("/tmp/csm$$", "\n\$g address transformations for mailer $i [$rules]:\n");
}

unlink("/tmp/csm$$") || die "Can't unlink /tmp/csm$$";
unlink("/tmp/csm.in$$");

exit;

${this.title}

Code Editor : checksendmail